Many Germans enjoy a long hot shower in the morning – mold risk. Can it be solved by simple domestic means?
Housepeople often do not see the way out, but they fight mold chemicals. But even these special removers contain aggressive substances that can be harmful to health. That is why in many places the question arises as to whether it makes sense to solve the suffering enemy in the shower with domestic means – but which are suitable for it and how well do they work?
That's why mold develops in the shower
The forms feel comfortable there where one high humidity prevails. That is why the bathroom is a great place to eat, in general the room temperature is higher than in the other rooms and most of the time we do not ventilate as we should after showering. Especially in the shower where most of the moisture is contained, the closed cabin or shower curtain provides stagnant air – the perfect solution Growth environment for mold,
Looking for a new shower curtain? Perhaps the trend-modeling model "Nova" will tell you. Affiliate Link
He sat down primarily on Silicone joints on the shower wall or transitions between glass walls fixed. The shower corners above the shower tray are also affected.
Before removing mold: You must pay attention to it
Although home remedies are less aggressive than some cleaners, certain precautions are still required to remove mold.
- Always wear it mouthguard – Reduce the risk of mold breathing.
- with rubber gloves Avoid direct contact with mold, which may lead to an allergic skin reaction.
- protection glasses prevents eye irritation.
- Wear one disposable overalls about your clothes so that disputes can't get there.
- Discard used rags, sponges and brushes immediately.
Remember that home remedies are only suitable for mild forms. If you have a big form, you need professional professional help.
For removing mold from silicone joints
As mentioned, the mold is usually found in silicone joints in the shower. Releasing tiles from attack is very difficult. Silicone consistency it gives the mold the ability to grow over the material so that the silicone must usually be completely restored. To do this, the silicone must be strongly removed around the joints. Don't make a mistake by simply inserting a new silicone. Otherwise the form will return very quickly. The joints should then be sprayed with high percentages of alcohol and rinsed once to kill the remnants of the mold.
Home Remedies: It brings vinegar into mold in the shower
There are some home remedies that work quite well against mold – but it depends on the ground. They are likely to have less influence on tiles than on bare walls. However, it is advisable to prevent the formation of mold in the joints.
One of these home remedies is vinegar. Some talk about "normal" vinegar and others about vinegar essence. But what is the difference and what works better?
Vinegar is usually a normal food vinegar that is used for cooking. He has one Acid content 5 to 10%The essence of vinegar is another name for acetic acid, which is also used in detergents. Therefore, acidity is much higher and use only with great care. Use rubber gloves and goggles when using them. You should keep your fingers away from acids that are over 60% pure.
For mold control, the higher acidity of vinegar essence is preferable to food vinegar. And it has other benefits:
- Almost everyone has vinegar in the house.
- The smell is limited.
- She has vinegar essence no environmental impact and
- is very good compared to other cleaning agents economic,
However, when using vinegar essence, you should be aware of the following points:
- on calcium substrates It does not work
- Mold spores (which aid in the spread of mold) are poorly controlled
- Essential vinegar with a purity of more than 30% Can not be used on any surface
Put vinegar – either conventional or vinegar – in a spray or cloth and wipe the affected areas. Then wipe with a damp cloth.
Suitable for this purpose: What do tenants and landlords do in case of attack on form?
Alcohol and alcohol as a home remedy for mold control
On substrates that vinegar cannot tolerate, you can a high percentage of alcohol fall back. Whether alcohol, isopropanol alcohol or ethyl alcohol – at least he should do so to counteract fungus 70 percent be. The benefits of alcohol use are obvious:
- Alcohol is odorless,
- Predominates no risk of chemical burns,
- He is applicable to all substrates,
- There is no danger to the environment,
However, unlike vinegar essence, you must be prepared for these problems:
- Remember to avoid smoking in the app or otherwise bring open fire near a high percentage of alcohol like this easily flammable Yippee.
- The effect evaporates quickly so the white horse often returns. Often several applications are needed and even then the cause of the form is usually not resolved.
Use yeast to prevent mold in the shower
Yeast is another useful remedy for mold in the shower enclosure. Especially in the joints, the yeast dissolved in the water can be well wiped with a toothbrush. Wait about ten minutes for the agent to work before wiping it with a cloth. The process may need to be repeated several times until it has an effect.
This will prevent mildew in the shower
You should be aware that all these household mold control products are useless if you do not fundamentally change the behavior of the shower. The best medicine for mold is one good prevention, Therefore, after showering each time with a towel dry the wallsIn addition, keep the cab door or hinge open long enough to allow the air to circulate in the shower enclosure. In addition, use a mild detergent regularly to clean the cab connections and cab doors.
If you find that there are places in the shower that are permanently wet, there may be a defect in inflow and outflow on the walls or floor. So always keep your eyes open and pay attention not only obvious stains from the mold.
Also read about how to stop mold in the apartment, especially in winter.
These things should be removed from your living room as quickly as possible